This a three room facility in Colchester Vermont, USA.
It is being designed by Fran Manzella of FMdesign

Checkout Egan 3 if you missed it.

It's really starting to come together. They put the glass in all the windows this week and hung most of the doors. The photo "Control Room Window" is just that, with a shot looking into the live room. The glass for that window took an entire day to clean and install. The Control Room side is 3 separate panes of 1/2" laminated glass with a silicone bead at each joint. The Live room side is 3 pieces of 3/8" tempered glass with a silicone bead joining the panes.

 

The "Live Room Window" photo shows the other side of the window looking into the control room. You can see the right surround speaker box and the machine niche framed and insulated. They are installing the birch Helmholtz resonators in the rear corners and the RPG Diffractals along the back wall of the control room today.

 

 

The two "Birch Panels in Live Room" photos are two different angles of the wall treatment I am using for the "live end" of the live room. The panels are hung on framing stuffed with more fiberglass insulation. The other half of the room will have cloth covered Owens Corning 703 panels. The crew will start working on those panels and the ones for the iso booths and the Control Room ceiling next week. We think we're about a month away from being done. As soon as they get the carpet laid in the Coontrol Room I will break down my existing studio and begin the wiring at the new place. There is a light at the end of the tunnel!

 

 

 

Cheers Joe Egan

Back to Top