This is a shot of the console I built to hold my main mixer (a StudioMaster 16-8-16) and also a Mackie 1604 VLZ. To the right of the StudioMaster are the patch bays. The racks below the mixer contain (from left to right) the computer in the left rack / power amp, headphone amp, DAT, mini disc and CD player in the center rack / reverbs, compressors and pre amps in the far right rack.

This shot shows the other end of the console where the patch bays are. The patch bays are all Switchcraft, 3 fifty-two point and 2 forty-four point. The far left rack contains 2 LX-20 ADATs, the MOTU 2408 mk II and a Tascam 238 Syncassette. In the back corner is the Tascam A-7010 reel to reel. The near fields are Yorkville YSM-1s. Also a pair of Bose powered monitors and Realistic Minimus 7s.

This is a detail of the back side of the patch bays. There,s over 3200 feet of Beldon audio cable used to everything together.

This is the back of the control room. That's an Alesis QS-8 to the right.

 

These are my mics. The top row is; Two AudioTechnica 4033's, an Octava MC 319, a Grove Tubes AM-52, an Apex 420 and a AKG C-3000. Next row are two AKG C-1000's, two Tascam PE-80's and two SM-58's. Next are the SM-57's and below an AKG D-112 anda Shure "Elvis" mic.

This is the view from the contol room into the studio. There are two doors between the control room and the studio.

Last but not least is my faithful companion, Track Dog. He's phantom powered but he doesn't have a very low noise floor.

Cheers Humannoise/Track Rat

Back to Top