New Belair studio

belairstudio · **Posted:** Fri Jun 26, 2009 8:06 pm

And the finished wall

belairstudio · **Posted:** Fri Jun 26, 2009 8:08 pm

I need a little help here

I have a concern about the spot where walls join the floor: it's not perfecly even, the floor as well, so there's a little air gap.. how do we seal that?

In the Live room, can the new floor suffice as a sealant? it's about 1cm in total (wood and stool)
What about CR where we have the floor already? walls have been stood up un the final flooring

Any input would be apreciated

jbassino · **Posted:** Sun Jun 28, 2009 2:45 am

Caulk caulk caulk caulk

belairstudio · **Posted:** Thu Jul 02, 2009 6:24 am

Update!

for the gaps we are going to caulk the floor as well, it should work.

Here's a few pics of the walls coming up!

belairstudio · **Posted:** Fri Jul 10, 2009 7:22 pm

Hi!

a little update with lotsa pics

We raised all the walls, doors structures, and CR ceiling as well. The thing is coming together!

belairstudio · **Posted:** Fri Jul 10, 2009 7:23 pm

this is one ceiling module, built on the floor then raised in place!

belairstudio · **Posted:** Fri Jul 10, 2009 7:30 pm

A few shots of the ceiling ion place with the truss holding it
(sorry iPhone pics... bit blurry!)

we were a bit scared removing the supports and leaving all the weight to the truss.. but in the end it ended up just fine. The truss flexed of about 1 cm in the middle that I suppose it's physically normal

belairstudio · **Posted:** Fri Jul 10, 2009 7:32 pm

A couple more views with gypsum added

John Sayers · **Posted:** Fri Jul 10, 2009 7:54 pm

Looking great Alberto.

You must understand that Alberto is working with a 2.3m (7' 6 1/2") ceiling height so the whole construction is inside out.

belairstudio · **Posted:** Fri Jul 10, 2009 8:17 pm

Thanks John!

these guys realy took the job as personal thing!

we're not realy used to work with wood over here, so it's chanllenging for them!

BTW we are working on the raising part of the ceiling!!

John Sayers · **Posted:** Fri Jul 10, 2009 8:20 pm

belairstudio wrote:

BTW we are working on the raising part of the ceiling!!

belairstudio · **Posted:** Fri Jul 17, 2009 11:03 pm

Another pic update, things are going fast!

All frames and gypboards are up!

Amazing how the studio looks and feel much better than it already did on the design, great use of space and view!!

belairstudio · **Posted:** Fri Jul 17, 2009 11:06 pm

and this is how the ceilling has been raised from 2.1 to 2,6 where possible!

John Sayers · **Posted:** Sat Jul 18, 2009 7:20 am

looking great Alberto - my compliments to the carpenters

belairstudio · **Posted:** Thu Jul 30, 2009 10:49 pm

A little Update, all rockwooling caulking and plastic stapling complete

Electrical fitted!

John Sayers' Recording Studio Design Forum

New Belair studio

Who is online